- This event has passed.
ProFusion Expo 2017 – DJI Training Area Sessions
November 7, 2017 @ 11:00 am - November 8, 2017 @ 5:00 pm
THESE ARE NOT TICKETS TO ATTEND PROFUSION EXPO. THESE TICKETS WILL ALLOW YOU TO ATTEND THESE SESSIONS ON WHICHEVER DAY YOU ATTEND THE SHOW.
PLEASE MAKE SURE THAT YOU HAVE REGISTERED FOR PROFUSION EXPO BEFORE REGISTERING FOR THESE SEMINARS.
DJI Training Area – OSMO Handheld Gimbals
DURATION: 1 hour
- Tuesday, November 7 Session – 11:30 a.m. – 12:30 p.m.
- Wednesday, November 8 Session – 10:30 a.m. – 11:30 a.m.
It’s time to put an end to shaky videos!
Attend this one hour DJI training session and learn how adding a OSMO handheld gimbal to your production workflow can help put an end to the dreaded shake.
During this session, an experienced DJI instructor will discuss the differences, features and benefits of each of the four different OSMO models and answer any questions you might have about OSMO.
Register below to see how the OSMO will open up a whole new world of imaging for you.
Register for OSMO Handheld Gimbals Sessions
DJI Training Area – New Ronin 2 & Ronin Professional Gimbals w/ Ready Rig
DURATION: 1 hour lecture | 1 hour hands-on
- Tuesday, November 7 Session – 12:45 p.m. – 2:45 p.m.
- Wednesday, November 8 Session – 11:45 a.m. – 1:45 p.m.
Find out how the Ronin/Ronin 2 and Ready Rig systems will change your production workflow forever!
Lecture: Over the course of the first hour, a DJI instructor will discuss the advanced features and versatility of the RONIN & RONIN 2 and how they can help to save time and lower production costs.
Hands-On: Afterwards, DJI trainers and sales specialists will be on hand to answer your questions and give you the chance to experience the RONIN or RONIN 2 Gimbals and Ready Rig stabilizer first hand.
Register below for the New Ronin 2 & Ronin Professional Gimbals w/ Ready Rig session today!
Register for Ronin 2 & Ronin Professional Gimbals w/ Ready Rig sessions
DJI Training Area – UAV/Drone Operations Safety & Training w/ AlteX
Please Note: This is an Introductory Session ONLY, you will not be certified to fly UAVs at the end of the session.
Presented By: Yifei Zhao
DURATION: 1 hour
- Tuesday, November 7 Session – 2:00 p.m. – 3:00 p.m.
- Wednesday, November 8 Session – 1:00 p.m. – 2:00 p.m.
Get a taste of what the AlteX UAV Training Program has to offer!
This session serves as an introduction to AlteX’s Humber College Continuing Education program that is focused on Non-Aviation Professionals who utilize Multi-rotor Vertical Take-off/landing UAVs as part of their operations.
Presenter YiFei Zhao will discuss the various aspects for safe & legal operations for your UAV/drone including: current Transport Canada rules & regulations, the path to becoming a professional/commercial operator, how to safely travel with your UAV/drone and more!
About Yifei Zhao
Operations Director at AlteX UAV Technologies (Formerly NTFG)
UAV Program Lead at Humber College Media and IT Studies
Member of Unmanned Systems Canada
Member of IATSE Local 667 – UAV Department
Register below for the UAV/Drone Operations Safety & Training w/ AlteX today!
Register for the UAV/Drone Operations Safety & Training w/ AlteX Sessions
DJI Training Area – New Pilot Experience | SPARK, Mavic & Phantom
DURATION: 2.5 hours
- Tuesday, November 7 Session – 3:15 p.m. – 5:45 p.m.
- Wednesday, November 8 Session – 2:15 p.m. – 4:45 p.m.
Find out why the DJI New Pilot Experience is one of the most popular sessions at ProFusion Expo!
Ground School: Over the course of an hour, a DJI instructor will teach you the basic techniques required to get started and begin to safely piloting a DJI SPARK, Mavis Pro & Phantom 4.
Flight School: It’s time to put your new found knowledge to the test and earn your “wings”! Under the guidance of an experienced DJI pilot, you’ll get hands-on experience, feel the unique sense of excitement and freedom that flying a drone can bring.
Register below to see how taking your photography and film making to the next level has never been easier.
Register for New Pilot Experience | SPARK, Mavic & Phantom Sessions
DJI Training Area – Advanced UAV Production Systems for Film & TV*
DURATION: 1 hour *Part of this session will be a flight demonstration.
- Wednesday, November 8 Session – 3:45 p.m. – 4:45 p.m.
It’s time to step up to the next level of aerial production!
With shrinking budgets and resources, even the biggest Hollywood productions are embracing advanced UAV technology to capture the stunning aerial footage you see so often.
But in order to operate in the big leagues, you’ll need to understand how to operate a platform that is not only larger and faster, but also has the ability to carry the larger, heavier cameras & rigs that are used during film production.
In this informative, one-hour classroom session, you’ll learn everything you need to know to safely operate DJI’s most sophisticated flying machines, the MATRICE, INSPIRE 2 & Phantom 4 Pro systems.
Register below for the DJI Advanced UAV Systems Session today.
Register for the Advanced UAV Production Systems for Film & TV Session
Calendar powered by The Events Calendar