DJI Introduces The Supercharged Ronin 2 at NAB Show

DJI’s newest member of the Ronin family, the beefed up Ronin 2, features a touchscreen controller and the ability to handle almost double the payload of the original Ronin model.

Ronin 2 at NAB Show

As with the original Ronin, the Ronin 2 was designed for handheld applications but has been given some extra capabilities.  Now capable of aerial, car mounting, cablecam and Steadicam, the Ronin 2’s higher torque motors allows for larger payloads (up to 30 lbs / 13.6 kgs) and it’s new GPS algorithms let it perform smoothly in high-stress environments.

DJI has also eliminated the need for a separate stand by adding retractable feet to the detachable grip allowing it to stand upright on any flat surface.

Ronin 2 Remote at NAB Show

Remote

The Ronin 2 also features a redesigned remote featuring an integrated touchscreen controller, dual band 2.4/5.8 GHz frequencies allowing for two-person operation with an unobstructed range of over a kilometer.

The remote also allows users to change the control speeds of the joystick directly by tweaking the knobs with no need to change any settings in the new gimbal assistant app or directly on the Ronin 2.

The new gimbal assistant app gives operators control over, SmoothTrack settings, motor stiffness, and gimbal operation modes and includes some new studio oriented intelligent features such as Panorama, Timelapse and direct control of supported cameras.



Ronin 2 at NAB Show

Cameras & Camera Control

DJI says that as of now, the largest camera and lens combo they have tested with the Ronin 2 is the Arri Alexa Mini with a Canon CINE-Servo 17-120mm lens.

Operators will also be able to control settings such as ISO, frame rate, resolution and start/stop on selected cameras via the new camera control module.

All three previous modes (upright, underslung and briefcase) of operation are available, but now, operators can transition between upright and underslung modes without having to change the orientation of the camera. You can also lock the yaw motor for 2-axis mode for use with a steadicam.

 

Ronin 2 Features:

  • Three Axis Stabilization (special two-axis mode for use with Steadicams)
  • Larger camera cage with extendable arms
  • 5 x (than Ronin) more powerful motors encased in waterproof housing
  • 8 Hour run time (2.5 when powering gimbal, camera and accessories at the same time)
  • Third-party remote controllers can be used
  • Built-in Touch Panel
  • Operation Modes
    • Underslung Mode
    • Upright Mode
    • Briefcase Mode
    • Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode
  • Built-in, independent IMU module
  • DJI Advanced 32-Bit ARM Processor
  • DJI Specialized Gimbal Drive Motors with Encoders
  • Dual Battery System
  • Bluetooth Module
  • D-Bus Receiver Supported
  • 2.4 GHz/5.8 GHz Receiver
  • Temperature Sensors
  • Built-in GPS
  • USB Type-C Connection
  • Power and Video Signal through Slip Ring

No word on price or release date as of yet